Protection against water damage! Very easy & fast installation. Low power consumption (max. 4W). Fast opening and closing of the solenoid valve at the push of a button. Set consisting of control box with warning indicator, 3/4' magnetic valve, 3 humidity sensors each with 6m cable and power supply 230VAC. The solenoid valve is attached to the water connection and the humidity sensors are placed under the equipment to be monitored. As soon as a sensor registers moisture, a warning signal sounds and the solenoid valve closes automatically. Via the control box the alarm signal can be switched off and the magnetic valve can be opened again.
Protection against water damage! Set Waterstop 3/4' leak protection system with 3 sensors & alarm, incl. WEB water pressure regulator with pressure gauge and wire mesh hose 3/4' READY TO USE, incl. 6m hose PE Ultra 6,7mm x 9,5mm natural Very easy & fast installation. Quick opening and closing of the solenoid valve at the push of a button. The system is attached to the 3/4' water connection and the humidity sensors are placed under the equipment to be monitored. As soon as a sensor registers moisture, a warning signal sounds and the solenoid valve closes automatically. Via the control box the alarm signal can be switched off and the magnetic valve can be opened again.
Protection against water damage! Set Waterstop 3/8' leak protection system with 3 sensors & alarm, incl. WEB water pressure regulator with pressure gauge and water tap - STOP valve adapter IG3/8 'AG3/8' READY TO USE, incl. 6m hose PE Ultra 6,7mm x 9,5mm natural Very easy & fast installation. Quick opening and closing of the solenoid valve at the push of a button. The system is attached to the 3/8' water connection by means of a water tap - STOP valve adapter IG3/8 'AG3/8' and the humidity sensors are placed under the equipment to be monitored. As soon as a sensor registers moisture, a warning signal sounds and the solenoid valve closes automatically. Via the control box the alarm signal can be switched off and the magnetic valve can be opened again.
Electrical Valve 24VAC with exceptional flow properties. Valve front part can be removed for cleaning without locking the barrel, since the compensator cover is tight! Coil 24V/50Hz, 13.5 W, 100% ED Thread length: 40 mm stainless steel 1.4301/1.4307 SK 275-004 (Discontinued please order separately!)Temperature stability of seals up to 110 ° C
Nicht nur das Bier bleibt kalt – auch das Sperrventil!Der Einsatz des Poweradapters bewirkt eine für kurze Zeit volle Leistung des Ventils und danach nur eine kleine Haltespannung.Mit der niedrigen Haltespannung sinkt die Leistung erheblich, da sich die Spannungquadratisch in der Leistung auswirktDer vergossene Adapter wird lediglich in die 24V-Leitung geschlossen und schon sind die Probleme gelöst.Maße: 61 x 20 x 13 mm (L B H)
Stainless steel solenoid valve for direct connection to the 5/8 '. beer tap suitable for installation in the tower Graz or BaRo.Voltage 24VAC, 15W power, DN5, NBR, AG5 / 8', IG 5 / 8 '
Stainless steel solenoid valve for direct connection to the 5/8 '. beer tap suitable for installation in the tower Graz orBaRo.Voltage 24VAC, 15W power, DN5, NBR, AG5 / 8', IG5 / 8 '
Dispensing valve, electric, suitable for premix, wine, soda, etc.incl nipple 7mm, incl stainless steel spout 10mm - 90 ° left curved, food labeling Elger Genuine compensator of material type GS233,including coil 24 volts / 50 Hz, 6 watts,Leistunsbereich to 3 bar at the valve,24 volt, 50 Hz, 6.5 W, 6 bar
Postmixhahn mit elektronischer Steuerung v. Wasser / Sirupinkl. Portioniermodul 4-fachFließgeschwindigkeit: von 44ml/sec - 88ml/sec! KEINE LAGERWARE - LIEFERUNG NUR AUF BESTELLUNG !
Postmixhahn mit elektronischer Steuerung v. Wasser / Sirupinkl. Portioniermodul 4-fach, zusätzlich mit Sodahebel.Fließgeschwindigkeit: von 44ml/sec - 88ml/sec! KEINE LAGERWARE - LIEFERUNG NUR AUF BESTELLUNG !
Postmixhahn mit elektronischer Steuerung v. Wasser / Sirup,Fließgeschwindigkeit: von 44ml/sec - 88ml/sec! KEINE LAGERWARE - LIEFERUNG NUR AUF BESTELLUNG !
Postmixhahn mit elektronischer Steuerung v. Wasser / Sirup,zusätzlich mit Sodahebel.Fließgeschwindigkeit: von 44ml/sec - 88ml/sec! KEINE LAGERWARE - LIEFERUNG NUR AUF BESTELLUNG !
The capacitive empty level detection for beverage hoses is used to detect that a product has run out in order to activate an indicator, changeover device or block the product via a fault input of the control system. The special features of the product are: The beverage hose 3/8'' is pushed through the device The drink does not come into contact with any components of the device Fittings are not required An LED indicates the operational readiness and the empty state (flashing) An open collector output enables connection to a higher-level system The power supply is 5 V DC diameter of the turned part: 40 mm Length of the turned part: 80 mm Hose diameter: 3/8' / (AD 9.5 mm) Power supply: 5 V DC Power consumption: 20 mA
The transformers are manufactured with thermal protection switches and then shed. The mains connection is made with power plugs and about 3 m connection cable. On request we also manufacture transformers as per customer requirements.
230 V / 150 VA / 24 V 3 m cable, thermal fuse, molded, plug ??Suitable for simultaneous continuous operation of 6 postmix valves or more for a short time??