Technical Specifications: Material: Stainless Steel Input / Output: 3 x 5/8 'BSP Inner Diameter: 10mmWorking pressure: 0-7 bar Working temperature: 2-30 ° (drinks), up to 140 ° C when cleaning
Technical Specifications: Material: Stainless Steel Input / Output: 3 x 5/8 'BSP Inner Diameter: 10mmWorking pressure: 0-7 bar Working temperature: 2-30 ° (drinks), up to 140 ° C when cleaning
----------------------------------------------------------------------------------
Hersteller: WEB
EU-Verantwortlicher:
W. E. Blaschitz Computer-Dispensing-Systems
Drink-Equipment Handelsgesellschaft m. b. H.
AUSTRIA, 8101 Gratkorn, Grazer Str. 58
shop@schankanlagenhandel.eu
Ursprungsland: DK
Set completely pre-assembled on stainless steel plate, incl. 1 pneumatic beer pump series G56, suitable for short and long beer lines and for overcoming large differences in height. Delivery rate up to 26.5 litres/minute with free outlet. Delivery pressure: up to 9.3 bar. Delivery head max. 25 m. Suction height up to 4.5 m. Drive: gas or compressed air up to max. 8.3 bar. 1 stainless steel fob stop FEX-08 XL / G5/8'. 1 intermediate pressure regulator 1-ltg.,4bar, with pressure relief valve, for the bunging pressure of the keg. 1 intermediate pressure regulator 1-ltg.,7bar for the delivery pressure. Dimensions: h 500 mm, w 420 mm 510/5000 Set completely pre-assembled on stainless steel plate, incl. 1 Beer pump pneumatic Series G56 Suitable for short and long beer lines and to overcome large differences in height Delivery up to 26.5 liters / minute with free spout. Delivery pressure: up to 9.3 bar, delivery height 25 m max., Suction height up to 4.5 m, drive: gas / compressed air up to 8.3 bar max. 1 Beverage Stainless Steel Foam Stopper FEX-08 XL / G5 / 8 ' 2 intermediate pressure regulator 1ltg., 4bar, MicroMatic, m. S. V. kplt. including all connections, h 500 mm b 420 mm
The capacitive empty level detection for beverage hoses is used to detect that a product has run out in order to activate an indicator, changeover device or block the product via a fault input of the control system. The special features of the product are: The beverage hose 3/8'' is pushed through the device The drink does not come into contact with any components of the device Fittings are not required An LED indicates the operational readiness and the empty state (flashing) An open collector output enables connection to a higher-level system The power supply is 5 V DC diameter of the turned part: 40 mm Length of the turned part: 80 mm Hose diameter: 3/8' / (AD 9.5 mm) Power supply: 5 V DC Power consumption: 20 mA
Stainless steel beverage foam stopperFOB detector type 'FEX-02' 2x 3/8 'JGEmpty Detection Sensor optionally. Please see scale prices for distributors after the dealer registration!
Stainless steel beverage foam stopperFOB detector type 'FEX-08' 5/8' in&out, Empty Detection Sensor optionally. Please see scale prices for distributors after the dealer registration! ?? Call off framework contracts are possible to achieve better prices! ??
Fob Detector Typ FEX- 08 5/8' in and out Please see scale prices for distributors after the dealer registration!/ ?? Call off framework contracts are possible to achieve better prices! ??
Fob Detector Typ FEX- 09 5/8' in and out. Please see scale prices for distributors after the dealer registration! ?? Call off framework contracts are possible to achieve better prices! ??
----------------------------------------------------------------------------------
Hersteller: WEB
EU-Verantwortlicher:
W. E. Blaschitz Computer-Dispensing-Systems
Drink-Equipment Handelsgesellschaft m. b. H.
AUSTRIA, 8101 Gratkorn, Grazer Str. 58
shop@schankanlagenhandel.eu
Ursprungsland: IE
----------------------------------------------------------------------------------
Hersteller: WEB
EU-Verantwortlicher:
W. E. Blaschitz Computer-Dispensing-Systems
Drink-Equipment Handelsgesellschaft m. b. H.
AUSTRIA, 8101 Gratkorn, Grazer Str. 58
shop@schankanlagenhandel.eu
Ursprungsland: IE
Stainless Fillingstop for wall mounting, with 1/2 'JG connectors,particularly easy operation and maintenance,dismantled without tools, therefore very easy to clean,stops the inflow when containers or drums-fill,when the container is filled and overflowing prevented.Liquid content 35 mlCAUTION: Mounts must be ordered separately (per Fex 2 pcs.)
----------------------------------------------------------------------------------
Hersteller: WEB
EU-Verantwortlicher:
W. E. Blaschitz Computer-Dispensing-Systems
Drink-Equipment Handelsgesellschaft m. b. H.
AUSTRIA, 8101 Gratkorn, Grazer Str. 58
shop@schankanlagenhandel.eu
Ursprungsland: IE
Stainless steel foam stopper incl. sensor, for wall mounting, with 5/8' threaded connections, very easy to use and service, liquid capacity approx. 60 ml, can be disassembled without tools, therefore very easy to clean, stops the beer flow immediately when the keg is empty and guarantees that the beer line remains filled. Therefore no hassle when changing the keg !
SPECIAL stainless steel foam stopper for wall mounting, with 5/8' threaded connections, 160mm sight glass and 160mm tube, particularly easy to operate and service, can be disassembled without tools, therefore very easy to clean, stops the flow of beer immediately when the keg is empty and guarantees that the beer line remains filled. Therefore, no hassle when changing the keg!
----------------------------------------------------------------------------------
Hersteller: WEB
EU-Verantwortlicher:
W. E. Blaschitz Computer-Dispensing-Systems
Drink-Equipment Handelsgesellschaft m. b. H.
AUSTRIA, 8101 Gratkorn, Grazer Str. 58
shop@schankanlagenhandel.eu
Ursprungsland: CN
FOB Detector for wall mounting, particularly user-friendly. FOB Detector immediately stops the flow of beer when the keg is empty and guarantees that the beer line is filled. Therefore, no loss in beer barrel change![TAB:DATA-SHEET]Datenblatt/STL%20FOB%20Installation%20and%20Operating%20Instructions.pdf
FOB Detector for wall mounting, particularly user-friendly. FOB Detector immediately stops the flow of beer when the keg is empty and guarantees that the beer line is filled. Therefore, no loss in beer barrel change![TAB:DATA-SHEET]Datenblatt/STL%20FOB%20Installation%20and%20Operating%20Instructions.pdf
use ready-set consisting ofStainless Füllstopper for wall mounting,with wall brackets, incl. 2 m FlexLayer 4 x 8 mm connection hose with mounted plug-in coupling andabout 1 m FlexLayer 4 x 8 mm drain hose,particularly easy operation and maintenance,dismantled without tools, therefore very easy to clean,stops the feed when containers or drums-fill,when the container is filled and overflowing prevented.Liquid content 35 ml
Two kegs can be connected at the same time if the distance between the kegs is large, and a wired switch box (IP65 waterproof) in the counter area can be used to switch from one empty keg to the next full keg. Replaces the non-hygienically ideal series connection for beer kegs. The use of electric ball valves means that there is no negative heat development on the beer line. The line cross-section is not constricted as with other commercially available solenoid valves. Ready to install, incl. 5V/2A plug-in power supply unit, switch box and 20 m connection cable for the counter switch, the ball valve connection is 1/4', power consumption per valve approx. 2 watts, beverage connections 3x 3/8' plug connectors.
EASY SWITCH® schaltet automatisch, denkt optional im Netzwerk mit und hält dank minimierter Haltespannung an den Ventilen diese eiskalt.Das bedeutet: Null Schankverlust, volle digitale Kontrolle und garantiert perfekt gekühlte Getränke bei minimalem Stromverbrauch.Gerät inkl. 2 FEX Fobstop inkl. Edelstahlventile, montiert auf einer Edelstahl-Montageplatte, inkl. Reinigungsprogramm, montagefertig, inkl. Steckernetzteil.(Es wird kein weiterer Trafo benötigt).
The Automatic Keg Changer device controls three feed inlets. Never change kegs during operation. Due to the automatic foam venting no venting between the keg changes has to be carried out. More tapping comfort with considerably less losses. Keg status display allows personnel to easily identify empty kegs during operation and change empty kegs during operation. Connections 3/8' or 1/2' JG connections. Power supply 24V
Never change kegs during operation! More tapping convenience with significantly fewer losses. The keg status indicator allows staff to easily identify empty kegs during operation and change empty kegs during operation. The changeover unit controls three feed lines and communicates with the WEB- DX dispensing system. During the changeover process, the portion is stopped by means of a stop valve and then the remaining portion is dispensed. Incl. 3 stainless steel ball valves electric, incl. 3 capacitive empty level detectors for beverage hoses. The beverage does not come into contact with any components of the empty level detection! Incl. 3 vent valves, which, if necessary, can be briefly actuated when the keg is changed. Incl. relay with change-over contact to control a blocking valve during the change-over process (for non WEB- DX- systems). Power supply 24V